ngHobbies
800MW 1.3GHZ 2 CHANNEL TRANSMITTER
Features:, Frequency Band:, 1258MHz and 1280MHz, Number of Channels:, 2, Audio Sub-carrier:, 5.5MHz, Transmission Range:, 1000 Meter plus, Power Consumption:, 600mA, Output Power:, 800mW, Operation Voltage:, 12, Power Supply:, 12V/750mA, Antenna Connector:, SMA Connector, Weight:, 9 g, Dimensions:, 50 x 25.7 x 8 mm, Documentation:, , Warranty:, 3 months, Note:, * The use and operation of this product will require a HAM or Amateur radio license.,
Highly integrated 1.3 GHz transmitter. These transmitters are supplied with ...ngHobbies
600MW 5.8GHZ IMMERSIONRC TRANSMITTER
Operating Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
Weight | 20 grams |
Size | 57 x 34mm |
Input voltage range | 6 - 16 v |
Parameters:, 600mW output power, Content of the package:, 1 x 600mW Transmitter module, Note:, The use and operation of this product in Canada and United States will require a HAM or Amateur radio license. Please check with your local authorities before purchasing this product.,
The Immersion RC's 5.8Ghz 600mW transmitter is a state of ...ngHobbies
DRAGONOSD+ V2
Width | 29mm |
Height | 12mm |
Length | 50mm |
Weight | 10 grams (OSD only) |
Display Features:, Voltage measurement:, 2 ports available, Current measurement:, 1 port available, GPS sensor provides:, Altitude, Ground speed, Coordinates, Number of satellites, Heading indicator, Home direction, LOS Distance, Distance to home, Barometric sensor provides:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, Compass:, Magnetic heading indicator, IMU:, Artificial Horizont, Other features:, Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, Alerts:, Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Wayppoints:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), This package contains the following items:, Main DragonOSD+ V2 board only, Dimensions:, , Documentation:, Click here, Connection schematics:, Click Here, Firmware upgrades and download PC software:, Click here,
New Generation Hobbies is happy to bring you the new, ...ngHobbies
XBEE INTERFACE ADAPTER PAIR
Industrial operating temperature range | -40 ° C to +85 ° C. |
Specifications of the USB module:, pre installed FTDI USB to serial converter chip, no driver is requored for most Windows systems., The following items are included in this kit:, 1 x USB Interface adaptor, Important:, xBee modules are NOT included in this kit., Manual:,
This interface pair has been developed by New Generation Hobbies ...ngHobbies
10 MW 2.4GHZ LIGHTWEIGHT TRANSMITTER
,
This is a 10mW transmitter for the GP707 receiver. It ...ngHobbies
1W LM 1.2GHZ TRANSMITTER
Features:, Frequency Band:, 1200MHz, Number of Channels:, 8, Audio Sub-carrier:, 5.5MHz, Transmission Range:, 500 Meter plus, Power Consumption:, 450mA, Output Power:, 1000mW, Operation Voltage:, 12, Power Supply:, 12V/500mA, Antenna Connector:, SMA Connector, Weight:, 30 g, Dimensions:, 26 x 50 x 13 mm, Documentation:, , Warranty:, 6 months, Note:, The use and operation of this product will require a HAM or Amateur radio license., Important note for Canada customers:,
If this transmitter is ordered/shipped to a USA address, it ...ngHobbies
FAT SHARK ATTITUDESD V2 EDITION
Content of the package:, AtttitudeSD headset (with integrated 5G8 RX and Trinity Headtracker), Note:, Battery, charger and adjustable earphones are sold separately., Note:, Because ot the bundled 250mW 5.8Ghz transmitter the use and operation of this product in Canada and United States will require a HAM or Amateur radio license. Please check with your local authorities before purchasing this product.,
The new AttitudeSD V2 is the best all round FPV ...HobbyKing
RED SWAN LASER CUT BALSA KIT 1250MM (KIT)
Span | 1250m |
Length | 810mm |
Specs:, Requires:, 4 Channel radio system and 4 x micro servos,
Here's another great affordable little balsa Kit for the traditional ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/10 45A SENSORLESS CAR ESC
Cont. Current | 45A |
Burst Current | 90A |
Car Size | 1/10th |
Battery | 2-3 Cell Lipo |
S-BEC | 5.0V / 2A Output |
Size | 40.5 x 37.5 x 24mm |
Weight | 45g |
Battery Plug | Required |
On/Off Switch | Yes |
Reverse | Yes |
Thermal Overload Protection | Yes |
Battery Terminals | 14AWG size |
Motor Terminals | 14AWG size |
Specification:, Motor Type:, Sensorless Brushless (2s 8.5turn, 3s 13.5turn - or higher), Programming Options:, (Via Optional programming card),
The Turnigy TrackStar 1/10th scale 45amp car ESC is the ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/10TH 60A SENSORED/SENSORLESS CAR ESC
Cont. Current | 60A |
Burst Current | 100A |
Car Size | 1/10th |
Battery | 2-3 Cell Lipo |
S-BEC | 5.0V / 2A Output |
Size | 40.5 x 37.5 x 24mm |
Weight | 45g |
Battery Plug | Required |
On/Off Switch | Yes |
Reverse | Yes |
Thermal Overload Protection | Yes |
Battery Terminals | 14AWG size |
Motor Terminals | 14AWG size |
Specification:, Motor Type:, Sensored or Sensorless Brushless (2s 6.5turn, 3s 10.5turn - or higher), Programming Options:, (Via Optional programming card),
The Turnigy TrackStar 1/10th scale 60amp car ESC is the ...5 Reviews
HobbyKing
LITTLE BUG LASER CUT BALSA KIT 1000MM (KIT)
Wingspan | 1000mm |
Fuselage | 520mm |
Weight | 650g |
ESC | 20A |
Battery | 3s 1800mah |
Includes | Pushrods |
Spec:, Motor:, 28mm 1200kv outrunner, Requires:, Your own 4 channel radio - with elevon mixing,
Here's a unique laser cut balsa kit for modellers that ...3 Reviews
HobbyKing
SUNBIRD ELECTRIC GLIDER LASER CUT BALSA KIT 1600MM (KIT)
Span | 1600mm |
Length | 850mm |
Specs:, Requires:, 4 Channel radio system and 4 x micro servos,
Here's another of our superb Laser Cut Balsa Kits for ...5 Reviews
HobbyKing
CLOUD DANCER TRAINER BALSA LASER CUT AIRPLANE KIT 1300MM (KIT)
Span | 1300m |
Length | 900mm |
Weight | 1000g |
Specs:, Requires:, 4 Channel radio system and 4 x mini servos,
Here's another great affordable little balsa Kit for the traditional ...5 Reviews
ngHobbies
HISIGHT III
Weight including tilt servo | ~75 g |
Installation is in 20-25 minutes. Please follow the instructions on this page:, Installation instructions, Technical Data:,
The HiSight III is an upgraded digital camera mount for ...DPCAV
1.3GHZ A/V RECEIVER WITH COMTECH TUNER (1258MHZ COMPATIBLE)
Four (4) RF channels | 1258MHz, 1280MHz, 1320MHz, 1360MHz. |
Instruction Manual | Click Me! |
Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver.,
New for 2013! The RX1258-CTS is a four-channel wireless A/V ...